XProfan

const geometry = RoundedBoxFlat( width, height, depth, radiusCorner, smoothness );

function RoundedBoxFlat( w, h, d, r, s ) {

    const pi2 = Math.PI * 2;
    const n = ( s + 1 ) * 4;// number of segments
    let indices = [];
    let positions = [];
    let uvs = [];
    makeFronts( n,  1,     0 );// segments, front is 1, start index 0 is center front
    makeFronts( n, -1, n + 1 );// segments, back is -1, start index n + 1 is center back
    makeFrame( n, 2 * n + 2, 1, n + 2 );// segments, start index framing ,start index front, start index back
    const geometry = new THREE.BufferGeometry( );
    geometry.setIndex( new THREE.BufferAttribute( new Uint32Array( indices ), 1 ) );
    geometry.setAttribute('position', new THREE.BufferAttribute( new Float32Array( positions ), 3 ) );
    geometry.setAttribute('uv', new THREE.BufferAttribute( new Float32Array( uvs ), 2 ) );
    // add multimaterial groups for front, back, framing
    const vtc = n * 3 ;// vertex count
    geometry.addGroup ( 0, vtc, 0 );
    geometry.addGroup ( vtc, vtc, 1 );
    geometry.addGroup ( 2 * vtc, 2 * vtc + 3, 2  );
    geometry.computeVertexNormals( );
    return geometry;

    function makeFronts( n, side, idx ) {

        const d0 = side === 1 ? 0 : 1;
        const d1 = side === 1 ? 1 : 0;

        for ( let j = 1; j < n; j ++ ) {

            indices.push( idx, idx + d0 + j, idx + d1 + j  );

        }

        const d2 = side === 1 ? n : 1;
        const d3 = side === 1 ? 1 : n;
        indices.push( idx, idx + d2 , idx + d3 );
        positions.push( 0, 0, side * d / 2 );// center
        uvs.push( 0.5, 0.5 );

        for ( let j = 0; j < n; j ++ ) {// contour

            const qu = Math.trunc( 4 * j / n ) + 1 ;// quadrant  qu: 1..4
            const sgn = ( qu === 1 || qu === 4 ? 1: -1)// signum left/right
            const c = { x: sgn * ( w / 2 - r ), y: ( qu < 3 ? 1 : -1 ) * ( h / 2 - r ), z: side * d / 2 }// quadrant center
            const x = c.x + r * Math.cos( pi2 * ( j - qu + 1 ) / ( n - 4 ) );
            const y = c.y + r * Math.sin( pi2 * ( j - qu + 1 ) / ( n - 4 ) );
            const z = c.z;
            positions.push( x, y, z );
            const u0 = side === 1 ? 0 : 1;
            uvs.push( u0 + side * ( 0.5 + x / w ), 0.5 + y / h );

        }

    }

    function makeFrame( n, sidx, sif,  sib ) {

        let a, b, c, d, xf, yf, zf, xb, yb, zb;
        const pif = sif * 3;// position start index  front
        const pib = sib * 3;// position start index back
        let st = [];
        let idx = sidx;

        for ( let j = 0; j < n; j ++ ) {

            a = idx;
            b = idx + 1;
            c = idx + 2;
            d = idx + 3;
            indices.push( a, b, d, a, d, c );
            idx += 2;

        }

        for ( let j = 0; j < n ; j ++ ) {

            const j3 = j * 3;
            xf = positions[ pif + j3 ];
            yf = positions[ pif + j3 + 1 ];
            zf = positions[ pif + j3 + 2 ];
            xb = positions[ pib + j3 ];
            yb = positions[ pib + j3 + 1 ];
            zb = positions[ pib + j3 + 2 ];
            positions.push( xf, yf, zf, xb, yb, zb );

            if ( j === 0 ) st = [ xf, yf, zf, xb, yb, zb ];// memorize

                const v = j / n;// here only independent of section height
                uvs.push( 0, v, 1, v );

            }

            positions.push( st[ 0 ], st[ 1 ], st[ 2 ], st[ 3 ], st[ 4 ], st[ 5 ] );// end = start
            uvs.push( 0, 1, 1, 1 );

        }

    }

<!DOCTYPE html>
<!-- https://discourse.threejs.org/t/round-edged-box-flat/30012 -->
<head>
<title> RoundedBoxFlatUV </title>
<meta charset="utf-8" />
<style>
body {  margin: 0; }
</style>
</head>
<body>
</body>
<script type="module">
// @author hofk
import * as THREE from "../jsm/three.module.132.js";
import { OrbitControls } from "../jsm/OrbitControls.132.js";
const scene = new THREE.Scene( );
const camera = new THREE.PerspectiveCamera( 55, window.innerWidth / window.innerHeight, 0.01, 10000 );
camera.position.set(  4, 12, 12 );
const renderer = new THREE.WebGLRenderer( { antialias: true } );
renderer.setSize( window.innerWidth, window.innerHeight );
renderer.setClearColor( 0xdedede, 1 );
const container = document.createElement('div' );
document.body.appendChild( container );
container.appendChild( renderer.domElement );
const axesHelper = new THREE.AxesHelper( 10 );
scene.add( axesHelper );
const controls = new OrbitControls( camera, renderer.domElement );
const texturLoader = new THREE.TextureLoader( );
const material = [

new THREE.MeshBasicMaterial( { map: texturLoader.load('uvgrid01.png' ), wireframe: false} ),

    new THREE.MeshBasicMaterial( { map: texturLoader.load('uv_grid_opengl.jpg' ), wireframe: false} ),

        new THREE.MeshBasicMaterial( { map: texturLoader.load('uvgrid01.png' ), wireframe: false } ),

            ];
            // const material =new THREE.MeshBasicMaterial( { color: 'black',  wireframe: true } );
            const width         =  5;
            const height        =  4;
            const depth         =  9;
            const radiusCorner  =  1;
            const smoothness    =  4;
            const uStartQuadr   =  2;// tart quadrant regarding u, default is 1
            const geometry = RoundedBoxFlat( width, height, depth, radiusCorner, smoothness, uStartQuadr );// uStartQuadr optional
            geometry.computeVertexNormals( );
            const mesh = new THREE.Mesh( geometry, material );
            scene.add( mesh );
            animate( );

            function animate( ) {

                requestAnimationFrame( animate );
                renderer.render( scene, camera );

            }

            function RoundedBoxFlat( w, h, d, r, s, q ) {

                let qu = q || 1;// qu: start quadrant regarding u, optional
                const pi = Math.PI;
                let indices = [];
                let positions = [];
                let uvs = [];
                makeFronts( s,  1, 0 );// smoothness, front is 1, start index  center front
                makeFronts( s, -1, 4 * ( s + 3 ) + 1 );// smoothness, back is -1, start index center back
                makeFrame( s, 2 * ( 4 * ( s + 3 ) + 1 ), 1,  4 * ( s + 3 ) + 2 );// smoothness, start index framing ,start index front, start index back
                const geometry = new THREE.BufferGeometry( );
                geometry.setIndex( new THREE.BufferAttribute( new Uint32Array( indices ), 1 ) );
                geometry.setAttribute('position', new THREE.BufferAttribute( new Float32Array( positions ), 3 ) );
                geometry.setAttribute('uv', new THREE.BufferAttribute( new Float32Array( uvs ), 2 ) );
                // add multimaterial groups for front, back, framing
                const vtc = 4 * ( s + 2 ) * 3;
                geometry.addGroup ( 0, vtc, 0 );
                geometry.addGroup ( vtc , vtc, 1 );
                geometry.addGroup ( 2 * vtc, 2 * vtc + 3, 2 );
                geometry.computeVertexNormals( );
                return geometry;

                function makeFronts( s, side, idx ) {

                    const d0 = side === 1 ? 0 : 1;
                    const d1 = side === 1 ? 1 : 0;
                    let id = 0;

                    for ( let q = 1; q < 5; q ++ ) {// quadrants

                        id ++;

                        for ( let j = 0; j < s + 2; j ++ ) {

                            indices.push( idx, idx + d0 + id, idx + d1 + id  );
                            id ++;

                        }

                    }

                    positions.push( 0, 0, side * d / 2 );// center
                    uvs.push( 0.5, 0.5 );
                    let x, y, z, sgnX, sgnY;
                    let phi = 0;
                    const u0 = side === 1 ? 0 : 1;

                    for ( let q = 1; q < 5; q ++ ) {

                        sgnX = q === 1 || q === 4 ? 1 : -1;
                        sgnY = q < 3 ? 1 : -1 ;
                        x = Math.cos( phi ) * w / 2;
                        y = Math.sin( phi ) * h / 2;
                        z = side * d / 2;
                        positions.push( x, y, z );
                        uvs.push( u0 + side * ( 0.5 + x / w ), 0.5 + y / h  );

                        for ( let j = 0; j < s + 1; j ++ ) {

                            const c = { x: sgnX * ( w / 2 - r ), y: sgnY * ( h / 2 - r ), z: side * d / 2 }// quadrant center
                            const dPhi = pi / 2 * j / s;
                            x = c.x + r * Math.cos( phi + dPhi );
                            y = c.y + r * Math.sin( phi + dPhi );
                            z = c.z;
                            positions.push( x, y, z );
                            uvs.push( u0 + side * ( 0.5 + x / w ), 0.5 + y / h );

                        }

                        phi = phi + pi / 2;
                        x = Math.cos( phi ) * w / 2;
                        y = Math.sin( phi ) * h / 2;
                        z = side * d / 2;
                        positions.push( x, y, z );
                        uvs.push( u0 + side * ( 0.5 + x / w ), 0.5 + y / h  );

                    }

                }

                function makeFrame( s, sidx, sif, sib ) {

                    let a, b, c, d, xf, yf, zf, xb, yb, zb;
                    const pif = sif * 3;// position start index front
                    const pib = sib * 3;// position start index back
                    let idx = sidx;

                    for ( let q = 1; q < 5; q ++ ) {

                        for ( let j = 0; j < s + 2; j ++ ) {

                            a = idx;
                            b = idx + 1;
                            c = idx + 2;
                            d = idx + 3;
                            indices.push( a, b, d, a, d, c );
                            idx += 2;

                        }

                        idx += 2;

                    }

                    const ls = 2 * r * Math.sin( pi / ( s * 4 ) );// length of the outer line of a corner segment
                    const w2r = w / 2 - r;
                    const h2r = h / 2 - r;
                    const peri = 4 * w2r + 4 * h2r +  4 * s * ls;// perimeter
                    let u;
                    idx = 0;// reset

                    for ( let q = 1; q < 5; q ++ ) {

                        // console.log ( 'qu', qu );
                        u = qu / 4;

                        for ( let j = 0; j < s + 3; j ++ ) {

                            xf = positions[ pif + idx ];
                            yf = positions[ pif + idx + 1 ];
                            zf = positions[ pif + idx + 2 ];
                            xb = positions[ pib + idx ];
                            yb = positions[ pib + idx + 1 ];
                            zb = positions[ pib + idx + 2 ];
                            positions.push( xf, yf, zf, xb, yb, zb );
                            idx += 3;
                            // console.log ( 'u ', u );
                            uvs.push( u , 0, u, 1 );

                            if ( j === 0 )     { u -= q === 1 || q === 3 ? h2r / peri : w2r / peri; }

                            if ( j === s + 1 ) { u -= q === 1 || q === 3 ? w2r / peri : h2r / peri; }

                            if ( j > 0 && j < s + 1 ) { u -= ls / peri; }

                        }

                        qu = 4 - ( ( 5 - qu ) % 4 );// cyclic next quadrant with respect to u

                    }

                }

            }

            </script>
            </html>

<!DOCTYPE html>
<!-- https://discourse.threejs.org/t/create-circle-with-fuzzy-edge-made-of-individual-random-particles/30150/9 -->
<head>
<title> SphereWithRandomPointsl </title>
<meta charset="utf-8" />
<style>

body{

    overflow: hidden;
    margin: 0;

}

</style>
</head>
<body> </body>
<script type="module">
// @author hofk
import * as THREE from'../jsm/three.module.135.js';
import { OrbitControls} from'../jsm/OrbitControls.135.js'
let scene = new THREE.Scene();
let camera = new THREE.PerspectiveCamera( 60, innerWidth / innerHeight, 0.001, 100);
camera.position.set( 1, 1, 2 );
let renderer = new THREE.WebGLRenderer();
renderer.setSize(innerWidth, innerHeight);
renderer.setClearColor( 0xdedede, 1 );
document.body.appendChild(renderer.domElement);

window.addEventListener("resize", (event) => {

    camera.aspect = innerWidth / innerHeight;
    camera.updateProjectionMatrix();
    renderer.setSize(innerWidth, innerHeight);

});

let controls = new OrbitControls(camera, renderer.domElement);
let helper = new THREE.AxesHelper( );
scene.add( helper );
const n = 25000;// points count
const dri = 0.07;// radius inner difference
const r = 0.6;// radius main
const dro = 0.4;// radius outer difference
const geometry = PointsSphere( n, dri, r, dro );
const pointsMaterial = new THREE.PointsMaterial( { size: 0.01, color: 0xff00ff } );
const spherePoints = new THREE.Points( geometry, pointsMaterial );
scene.add( spherePoints );
renderer.setAnimationLoop( ( ) => { renderer.render(scene, camera); } );
// .....................................

function PointsSphere( n, dri, r, dro ) {

    // n: points count,  dri: inner difference , r: radius main, dro: outer difference
    const pts = [];

    for( let i = 0; i < n ; i++){

        const inout = ( Math.random( ) - 0.5 ) * 2;
        const lim = ( inout >= 0 ? dro : dri );
        const rand = r + Math.pow( Math.random( ), 3 ) * lim * inout;
        const θ = Math.PI * 2 * Math.random( );
        const φ = Math.acos( 2 *  Math.random( ) - 1 );
        const ps = new THREE.Vector3( Math.cos( θ ) * Math.sin( φ ),  Math.sin( θ ) * Math.sin( φ ),  Math.cos( φ ) );
        pts.push( ps.multiplyScalar( rand ) );

    }

    const geometry = new THREE.BufferGeometry( ).setFromPoints( pts );
    return geometry;

}

</script>
</html>

<!DOCTYPE html>
<!-- https://discourse.threejs.org/t/addon-to-create-special-extended-geometries/1855/12 -->
<head>
<title> MoonPhases </title>
<meta charset="utf-8" />
<style>

body{

    overflow: hidden;
    margin: 0;

}

</style>
</head>
<body></body>
<script type="module">
// @author hofk
import * as THREE from "../jsm/three.module.149.js";
import { OrbitControls } from "../jsm/OrbitControls.149.js";
const scene = new THREE.Scene( );
const camera = new THREE.PerspectiveCamera( 55, innerWidth / innerHeight, 0.01, 1000 );
camera.position.set(  0, 1, 4 );
const renderer = new THREE.WebGLRenderer( );
renderer.setSize( innerWidth, innerHeight );
renderer.setClearColor( 0xdedede );
document.body.appendChild(renderer.domElement);
const pointLight1 = new THREE.PointLight( 0xffff00, 1.1 );
pointLight1.position.set( 1, 2, 7 );
scene.add( pointLight1 );
const pointLight2 = new THREE.PointLight( 0xffff00, 1.1 );
pointLight2.position.set( -1, -2, -7 );
scene.add( pointLight2 );
new  OrbitControls( camera, renderer.domElement );
const material = new THREE.MeshPhongMaterial( { color: 0xfbfb23, wireframe: true,  side: THREE.DoubleSide } );
const moonGeo = MoonPhases( 1, 0.2, 32, 0 );
const moon = new THREE.Mesh( moonGeo, material );
scene.add( moon );
let t = 0;
animate( );

function animate( ) {

    t += 0.01;
    requestAnimationFrame( animate );
    moonGeo.calculatePositions( t );// phase dynamic
    renderer.render( scene, camera );

}

function MoonPhases( radius, depth, heightSegments, phase ) {

    const g = new THREE.BufferGeometry( );
    const pi = Math.PI;
    const pi2 = pi * 2;
    const hs2 = heightSegments * 2;// equals triangles per side
    const phs = phase || 0.1;
    let indices = [];
    let φ;
    let ib;// index back

    for ( let i = 0; i < hs2; i += 2 ) {

        indices.push( i, i + 2, i + 1,  i + 1, i + 2, i + 3 );// front

    }

    for ( let i = 0; i < hs2; i += 2 ) {

        ib = i + hs2 + 2;
        indices.push( ib, ib + 1, ib + 2,  ib + 1, ib + 3, ib + 2 );// back

    }

    for ( let i = 0; i < hs2; i += 2 ) {

        ib = i + hs2 + 2;
        indices.push( i, ib, ib + 2,          i,  ib + 2, i + 2 );// framing right
        indices.push( ib + 1, i + 1, i + 3,   ib + 1, i + 3, ib + 3 );// framing left

    }

    const sidePosCount = ( heightSegments + 1 ) * 2 ;
    g.setIndex( new THREE.BufferAttribute( new Uint32Array( indices ), 1 ) );
    g.setAttribute('position', new THREE.BufferAttribute( new Float32Array( sidePosCount * 2 * 3 ), 3 ) );

    g.calculatePositions = function( t ) {

        t = t % pi2;
        const leftEdge  = t => t < pi ? Math.cos( t ) : -1;
        const rightEdge = t => t < pi ? 1 : -Math.cos( t );
        φ = 0;

        for ( let i = 0; i < sidePosCount; i += 2 ) {

            // front
            g.attributes.position.setXYZ(  i    , radius * rightEdge( t ) * Math.sin( φ ), -radius * Math.cos( φ ), depth / 2 );
            g.attributes.position.setXYZ(  i + 1, radius * leftEdge( t )  * Math.sin( φ ), -radius * Math.cos( φ ), depth / 2 );
            //  back
            ib = i + hs2 + 2;
            g.attributes.position.setXYZ( ib    , radius * rightEdge( t ) * Math.sin( φ ), -radius * Math.cos( φ ), -depth / 2 );
            g.attributes.position.setXYZ( ib + 1, radius * leftEdge( t )  * Math.sin( φ ), -radius * Math.cos( φ ), -depth / 2 );
            φ += pi / heightSegments;

        }

        g.attributes.position.needsUpdate = true;
        g.computeVertexNormals( );

    }

    g.calculatePositions( phs * pi2 );
    return g;

}

</script>
</html>